The Order of Foreign Citizens Arrival at PSTU
Arrival of foreign citizens from the visa countries
Entry of foreign citizens with the visa report on the territory of the Russian Federation is possible if the visa is available. Foreign citizens have the right to arrive to the Russian high school, having entered to Russia under the guest or tourist visa. In this case the university does not bear responsibility for registration the foreign citizens arriving to the Russian Federation for the period of carrying out of introductory tests.
The foreign citizens who have successfully passed entrance tests and who are enrolled according to the University order should renew the visa in their country on the basis of official PSTU Invitation. For this purpose it is necessary for foreign citizen to leave the territory of the Russian Federation and to come to Russian Federation Consular department, which is specified in the Invitation handed out to him or her, to receive the visa with the purpose – Study and to enter the territory of the Russian Federation again for studying at PSTU.
Foreign citizens can enter Russian Federation for entrance tests with visa, got in Russian Federation Consular department of their country on the bases of PSTU Invitation. In case of successful passing entrance exams and being enrolled as a student of PSTU, the visa is extended till the end of academic year.
To enter the Russian Federation territory with the student visa and participate in introductory tests for studying at PSTU, it is necessary to send to International office via e-mails (osh@pstu.ru; intedu@pstu.ru) following documents:
1) The Application Form of a foreign citizen.
2) The Invitation Form of a foreign citizen, sent to International office after positive decision of PSTU to allow the foreign citizen to take the introductory tests with the purpose of further studying at PSTU.
3) Scanned copy of the passport page with photo.
In case of successful passing the introductory tests for entering PSTU the foreign citizen should give the package of documents specified in section of the Rules for Foreign Citizens Enrollment.
ATTENTION!
Within two working days after entrance date on territory of the Russian Federation specified in a migratory card, the foreign student should come to the international department PSTU (the Komsomolsky ave., 29, room 329) for registration. The untimely reference of the foreign citizen concerning registration is an administrative responsibility and is set a fine from 2 to 80 thousand roubles according to the Russian Federation Code about administrative responsibility.
Arrival of Foreign Citizens from Visa-Free Countries
Foreign citizens from the countries of the visa-free message - Azerbaijan, Armenia, Belarus, Kazakhstan, Kirghizia, Moldova, Tajikistan, Uzbekistan, Ukraine - arrive to the Russian Federation for entering Russian high schools using international passports, with the subsequent notice of their arrival. While crossing Russian Federation borders they receive and fill a migratory card on which the stamp of the passport control with date of entrance on the territory of the Russian Federation is put.
ATTENTION!
Within two working days after entrance date on territory of the Russian Federation specified in a migratory card, the foreign student should come to the international department PSTU (the Komsomolsky Ave., 29, room 329) for registration. The untimely reference of the foreign citizen concerning registration is an administrative responsibility and is set a fine from 2 to 80 thousand roubles according to the Russian Federation Code about administrative offences.
Rules for Foreign Citizens Enrollment
Admission of foreign citizens to PSTU on all types of study is carried out on the basis of the personal application submitted to the name of rector of the university and results of introductory tests.
Selection committee of PSTU accepts applications after signing the contract about training of the foreign citizen. This procedure is held in the International department of PSTU. Citizens of the foreign states, except citizens of Byelorussia, Kazakhstan, Tajikistan and the Kirghiz Republic, are admitted to PSTU with the contracts providing the full compensation of expenditures for education.
Enclosed documents are the following:
1. The original document, confirming previous education (not less than secondary education).
2. Notarial certified translation version (into Russian language) of the document on previous education and marks of the studied subjects; the passport with the visa (the entry purpose - Study).
3. The certificate of State Testing in The Russian as a Foreign Language (the first level) or the certificate on the graduating of preparatory faculty for foreign citizens at higher educational institutions of the Russian Federation except citizens from the countries of the former union republics.
4. The medical certificate testifying the absence of contra-indications for study in the Russian Federation with obligatory results of the test for AIDS (it must be originally in English, German or French languages with the appendix of the translation version into Russian, which is notarized).
5. The certificate about equivalence of the education document, received abroad, given out by Supervision Federal Agency in sphere of education and science (except citizens from Azerbaijan Republic, Armenia Republic, Byelorussia, Moldova Republic, Tajikistan Republic, the Kirghiz Republic, Kazakhstan Republic, Ukraine);
Citizens of Georgia, Latvia, Lithuania, Turkmenia, Uzbekistan, Estonia can introduce certificates on equivalence of educational documents within three months after the study beginning.
6. The contract of medical insurance, signed with one of the Russian insurance companies operating in Perm. Availability of insurance policy is a obligatory condition for studying at PSTU.
7. The documents confirming the right for the foreign citizen to stay on territory of the Russian Federation and Perm:
- The original of the international passport and 2 copies of pages with photo, surname and name;
- The original and 2 copies of the visa with instructions of the purpose of stay in Russia – "Study" - receiving party is PSTU;
- The original and 2 copies of a migratory card with a mark about time registration in Perm.
8. Six photos with the size 3х4 cm with a surname on the back side.
9. Contract for studying, signed by foreign citizen.
10. Document conforming the payment of the first period, defined in the contract.
It should be noted that according to the Russian Federation Code about administrative responsibility, the untimely reference of the foreign citizen concerning registration is an administrative responsibility and he or she can be set a fine from 2 to 80 thousand roubles.
Forms for Education:
Directions of Higher Education
Specialities of 5 - year Higher Education
1. 010501 – Applied mathematics and informatics;
2. 030602 – Public relations;
3. 031202 – Translation;
4. 031801 – Religious studies;
5. 040201 – Sociology;
6. 050501 – Skills training (branches);
7. 070601 – Design;
8. 080105 – Finances and credit;
9. 080111 – Marketing;
10. 080116 – Mathematical methods in economics;
11. 080502 – Economics and enterprise management (branches);
12. 080504 – Public and municipal management;
13. 080505 – Human recourse management;
14. 080507 – Organization management;
15. 080801 – Applied informatics (economics);
17. 120101 – Applied geodesy;
18. 130304 – Oil and Gas geology;
19. 130401 – Physical processes of mining or oil-and gas production
20. 130402 – Mine survey;
21. 130404 – Underground mining of minerals deposits;
22. 130501 – Engineering, building and operation of gas-and oil pipeline and storage;
23. 130503 – Development and operation of oil-and gas deposits;
24. 130504 – Oil-and gas well drilling;
25. 130602 – Machines and equipment of oil-and gas fields;
26. 140211 – Power supply;
27. 140601 – Eletromechanics;
28. 140604 – Electrical drive and automatics of industrial installations and technological complexes;
29. 140611 – Electrical insolating, cable and condensing technique;
30. 150105 – Physical metallurgy and metal heat treatment;
31. 150108 – Powder metallurgy, composite materials, covering;
32.150201 – Machines and metal deformation process technology;
33. 150202 – Equipment and welding engineering technology;
34. 150204 – Machines and foundry production technology;
35. 150301 – Machine dynamics and durability;
36. 150402 – Mining machinery and equipment;
37. 150502 – Construction and production of goods made of composite materials;
38. 150802 – Hedonic machines, hydraulic circuit and hydra pneumatic automation;
39. 151001 – Mechanical engineering technology;
40. 151002 – Metal-working machinery and complexes;
45. 190205 – Lifting, building, road vehicles and equipment;
46. 190601 – Vehicle and fleet;
47. 190603 - Transport machine and technological machine and equipment (according to branch);
49. 210201 – Projection and technology of electronics;
50. 210406 – Nets and communication systems;
51. 210602 – Nanomaterials;
52. 220201 – Management and informatics in technological systems;
53. 220301 – Automation of technological processes and production ( according to branches);
54. 220305 – Automated management of production life cycle;
55. 220306 – Quality management computer systems for automated operations (according branches);
56. 220501- Quality management;
57. 220601 – Innovation management;
58. 230101 – Computers, complexes, systems and nets;
59. 230102 – Automated systems of information processing and management;
60. 230105 – Computer engineering and atomization systems software;
61. 230201 – Information systems and technologies;
62.240301 – Chemical technology of nonorganic substances;
63. 240403 – Chemical technology of natural energy carrier and carbon-base materials;
64. 240406 – Chemical timber processing technology;
66. 240801 – Machines and devises of chemistry production;
67. 240901 – Biotechnology;
68. 261001 – Material processing technology;
69. 270102 – Industrial and civil engineering;
70. 270105 – Urban construction and economy;
71. 270106 – Building materials, goods, construction production;
72. 270109 – Heat supply and ventilation;
73. 270112 – Water supply and drainage systems;
74. 270115 – Property examination and management;
75. 270201 – Bridges and transport tunnels;
76.270205 – Motor roads and airdromes;
77.280101 – Personal and social safety in technosphere;
78. 280102 - Technological processes and production safety;
79. 280201 – Environmental protection and rational use of natural recourses
Bachelor’s Directions (4-year Education)
1. 010500 – Applied mathematics and information science;
2. 040200 – Sociology;
3. 080100 – Economics;
4. 080500 – Management;
5. 130400 – Mining;
6. 130500 – Oil and gas;
7. 140500 – Power-plant engineering;
8. 140600 – Electrical engineering, electrical mechanics and electric technologies;
9. 150100 – Metallurgy;
10. 150300 – Applied mechanics;
11. 150400 – Technological machines and equipment;
12. 150900 –Technology, equipment, and automation of machine-building industries;
13. 160100 – Aircraft engineering and rocket production;
14. 190500 – Vehicle operation;
15. 200100 – Instrument making;
16. 210400 – Telecommunications;
17. 220200 – Automation and control;
18. 230100 – Information science and computing technique;
19. 240100 – Chemical technology and biotechnology;
20. 270100 – Civil engineering;
21. 280200 – Environment protection.
Master’s Directions (2-year Education)
1. 010500 – Applied mathematics and information science (program Mathematical modeling);
2. 040200 – Sociology (program Sociology of labor and entrepreneurship);
3. 080100 – Economics (program Firm’s economics);
4. 080500 – Management (program General and strategic management);
5. 130400 – Mining (program Underground development of useful minerals deposits);
6. 150100 – Metallurgy (programs - Metal science and heat treatment, Powder metallurgy, composite materials and coatings);
7. 150300 - Applied mechanics (programs – Dynamics and machine durability, Biomechanics);
8. 150400 – Technological machines and equipment (programs – Machines and foundry technology, Machines and welding engineering technology);
9. 150900 – Technology, equipment and automation of machine-building industries (programs – Machine building technology. Engineering support of quality of machine building products. Design and equipment reliability of machine building productions);
10. 160100 – Aircraft engineering and rocket production (programs Design and construction of engines and power installations of aircrafts, Aerodynamics, hydrodynamics and heat exchanging processes of aircraft engines);
11. 210400 – Telecommunication (in program nets, communication centers and information distribution);
12. 220200 – Automation and control (program – Integrated systems of manufacturing management, Automation of manufacturing processes and productions);
13. 230100 – Information science and computing techniques (program Dispatched automated systems);
14. 240100 – Chemical technology and biotechnology (programs Chemistry and technology of inorganic substances and materials, Eco-biotechnology, Manufacturing biotechnology and bioengineering);
15. 280200 – Environment protection (programs Utilization and recycling of production and consumption wastes, Ecological audition).
Post-Graduate Courses
- 01.01.02 Differential equations
- 01.02.04 Mechanics of solid deformed body
- 01.02.05 Mechanics of fluids, gas and plasma
- 01.02.06 Dynamics, machine, devices and equpment durability
- 01.02.08 Biomechanics
- 02.00.01 Nonorganic chemistry
- 03.00.16 Environmental science
- 05.02.01 Materials schience (mechanical engineering)
- 05.02.02 Machine science, drives systems and machine components
- 05.02.08 Mechanical engineering technology
- 05.03.01 Technology and equipment of mechanical and physicotechnical treatrment
- 05.03.06 Welding engineering machines and technologies
- 05.04.02 Heat engine
- 05.04.13 Water engines, hydro-pneumatic units
- 05.05.06 Mining mashines
- 05.07.05 Heat, electrojet engine and power plants of flying units
- 05.09.01 Electromechanics and electrical units
- 05.09.03 Electrotechnical complexes an systems
- 05.13.05 Elements and structure of computing machinery and management systems
- 05.13.06 Automatisation and technological process management and production management (in industry)
- 05.13.10 Social and economic system management
- 05.13.12 Projecting automatosation systems (according to branches)
- 05.13.18 Math modelling, calculus of approximations and program complexes
- 05.16.01 Metal science and metal heat treatment
- 05.16.04 Foundry engineering
- 05.16.06 Powdery metallurgy and composite materials
- 05.17.01 Nonorganic substancies technology
- 05.17.07 Chemistry and fuel and special priducts technology
- 05.17.08 Processes and units of chemical technology
- 05.21.03 Technology and equipment of wood biomass chemical reprocessing;wood chemistry;
- 05.23.01 Building constructions
- 05.23.02 Foundation, underground structure
- 05.23.03 Heating, ventilation, air-conditioning, gas supply and lighting.
- 05.23.05 Building materials and goods
- 05.23.11 Road,undergraound railway, airdroms, bridges and tunnels projecting and building.
- 05.23.08 Technology and building organization
- 05.23.17 Biuilding machinery
- 05.26.01 Labour safety (according to branch)
- 05.26.03 Fire and indutrial safety
- 08.00.05 Economy management (according to fields: economic system theory management; macroeconomics; economics, enterprise organisation and management; innovation management; regional economy, logistics, labour economy, demography and population economy and etc.)
- 08.00.13 Mathematical and tool methods in economy
- 09.00.01 Ontology and theory of knowledge
- 09.00.04 Aesthetics
- 09.00.08 Philosophy of science and techniques
- 09.00.11 Social philosophy
- 09.00.13 Religious studies, philosophy anthropology, culture philosophy
- 10.02.19 Language theory
- 13.00.02 Theory and method of teaching and education(foreign language)
- 13.00.08 Theoty and mathod of professional education
- 14.00.07 Sanitary science
- 22.00.01 Theory, methodology and history of sociology
- 22.00.03 Economic sociology and demography
- 22.00.04 Social structure, social instituions and processes
- 23.00.02 Political instituions, ethnopolitical conflicts science, national and political processes and technologies
- 25.00.02 Peleontology and stratigraphy
- 25.00.10 Geophisics, geophisical methods of mineral products search
- 25.00.12 Geology, searching and exploring of fuel fossils
- 25.00.17 Engineering and exploatation of oil-and gas deposits
- 25.00.20 Geomechanics, shattering, mining airdinamics and mining thermal phisics
- 25.00.21 Theoretical basis of mine technical systme development
- 25.00.22 Geothechnology (undeground, exposed, building)
- 25.00.36 Geoecology
Directions of Doctoral Studies:
- 01.01.02 Differential equations
- 01.02.04 Mechanics of deformed solid body
- 01.02.05 Mechanics of a liquid, gas and plasma
- 01.02.06 Dinamics, strength of mashinesm devicies and equipment
- 02.00.01 Non-organic chemistry
- 05.03.06 Technologies and mashines of welding engineering
- 05.07.05 Thermal, electrorocket engines and power installations of flying machines
- 05.13.06 Automation and handle of technological processes and productions (in the industry)
- 05.16.01 Metallurgical science and thermal processing of metals
- 05.16.06 Powder mettalurgy and composit materials
- 05.17.01 Technology of non-organic materials
- 05.23.02 fondation bed, underground bulding
- 05.23.03 Heat supply, ventilation, air-conditioning, gas supply and illumination
- 09.00.01 Ontology and theory of knowledge
- 09.00.11 Social philosophy
- 09.00.13 Relifigion, philosophical ontropology, philosophy of the culture
- 22.00.01 Theory, metodology and history of the sociology
- 22.00.04 Social structure, social instittutions nad processes
- 25.00.36 Geoecology